METRO POWERProduct intelligencePlan a project ↗
BESS & Microgrids
Air-cooled microgrid ESS
BSC-CE2-0105K0215K / BSC-CE2-0105K0200K
Modular air-cooled cabinet for commercial, industrial and microgrid storage, published by Bescore as the CE2-105.
Manufacturer photograph
Inspect the product itself.
The image above is AI-lit from this manufacturer photograph for presentation, and no specification is read from it. Use the six views to inspect the manufacturer image, its close view, interfaces, system context, drawing gate and evidence boundary.
PRODUCT IMAGE · 01/06BSC-CE2-0105K0215K / BSC-CE2-0105K0200KProduct image from the available source. Confirm the exact model, ratings, dimensions and interfaces by document.
IMAGE REFERENCEManufacturer product renderRatings, dimensions, interfaces and compliance are confirmed from the applicable documents.
Air-cooled microgrid ESS, as published.
Figures as Bescore publishes them.
| Model | BSC-CE2-0105K0215K / BSC-CE2-0105K0200K |
|---|---|
| Type | Air-cooled microgrid ESS |
| System family | BESS & Microgrids |
| Power and energy | 105 kW with 215 kWh, or 100 kW with 200 kWh, as stated on the datasheet |
| Cells | Lithium iron phosphate (LFP) cells, 3.2 V / 280 Ah |
| Charge rate | 0.5P charge and discharge |
| AC connection | 400 V AC, 50/60 Hz |
| Protocols | MQTT, IEC 104 and Modbus TCP/IP interfaces |
| Ingress and environment | IP55; aerosol and water fire protection; -30 to 55 °C, derating above 45 °C |
Evidence level: technical sheet available. Confirm the exact model code, option, revision and controlling terms of reference (TOR) before using any fact in a compliance statement, offer or installation decision.
What the storage system connects to.
A battery only earns its place through the equipment around it: the supply it charges from, the switchgear that isolates it, the loads it protects and the sources a controller must coordinate.
Power path
- Utility gridAbsent on an off-grid site.
- TransformerService transformer, or an isolation transformer for an island.
- Switchgear and transfer deviceIsolates the system and moves the site between grid and island.
- This productBSC-CE2-0105K0215K / BSC-CE2-0105K0200KStores energy as DC and delivers it through the PCS.
- Site loadsCritical loads first when the battery is the only source.
Other sources the controller coordinates
- SolarCharges the battery or serves load directly.
- Diesel generatorBackup, or the second source on an island.
- From the BSC-CE2-0105K0215K / BSC-CE2-0105K0200KDispatch rules decide which source serves which load.
PowerReal product photographDrawn: equipment Metro Power does not supply
Options and differences
From pack to power station, as the principal publishes them
Storage is built in steps. Each step adds energy, voltage and the equipment needed to connect it.
- Battery pack
14 kWh at 51.2 V DC. The building block.
- Battery rack
215 kWh at 768 V DC. Packs in series, fitted inside an enclosure.
- This productCabinet system
105 kW with 215 kWh. Battery, PCS and controls in one outdoor cabinet.
- Battery compartment
Up to 5,016 kWh at 1,331.2 V DC. DC only; converts in a separate station.
- PCS and MV station
Up to 5,000 kW, stepped up to 10, 20 or 35 kV.
What is inside the BSC-CE2-0105K0215K / BSC-CE2-0105K0200K.
The blocks, the power path and the four signal buses, redrawn from the principal's published circuit diagram. It shows arrangement, not wiring; installation follows the controlled drawings.
Arrangement drawingProduct image, for identification
Inside the CE2-105 cabinet
Redrawn by Metro Power from the circuit diagram Bescore publishes for the CE2-105. Principal's published figures.Product image, for identificationHow to read it
- The CE2-105PG without its solar inputs and transfer switch: battery, HV box and PCS to a four-wire 400 V output.
- The BCMU is the only controller drawn. Dispatch comes from an external energy management system over Ethernet.
- Cooling and fire devices sit on RS485; emergency stop and access are hard-wired.
Key
- DC power
- AC power
- CAN bus: battery data
- RS485: auxiliaries
- IO: hard-wired safety signals
- LAN or Ethernet
- Monitoring connection
- Energy flow, shown when motion is allowed
BMU: battery management unit, one per module. BCMU: battery cluster management unit, one per string. HV box: DC contactors and fuses between the string and the converter.
Application context
Where this product fits.
Typical applications for this product family. Fit still depends on the exact service, duty, operating objective and approved configuration, so treat these as starting points rather than recommendations.
- 01Peak shaving
- 02Solar self-consumption
- 03Critical-load backup
- 04Diesel optimization
- 05Renewable smoothing
- 06Grid-tied storage on a constrained feeder
Related within BESS & Microgrids
Compare before you narrow.
The closest alternatives in this family. They may suit a different rating, service arrangement or operating requirement; open each record, or compare up to three side by side.
Before an offer
What Metro Power confirms before BSC-CE2-0105K0215K / BSC-CE2-0105K0200K is offered.
Three steps, in the order they happen: what the public record already shows, what your project must confirm, and the controlled documents that close the loop.
01Professional documentation
One product identity. Five controlled evidence gates.
This schedule shows what the public record supports and what Metro Power must still match before the product becomes a technical or commercial commitment.
ControlCurrent public recordProject release requirementStatus
IdentityBSC-CE2-0105K0215K / BSC-CE2-0105K0200K · Air-cooled microgrid ESSExact model code, production revision and option scheduleTechnical sheet available
ApplicationModular air-cooled cabinet for commercial, industrial and microgrid storage, published by Bescore as the CE2-105.Approved service, duty, site and operating useApplication review
Technical facts105 kW with 215 kWh, or 100 kW with 200 kWh, as stated on the datasheet · Lithium iron phosphate (LFP) cells, 3.2 V / 280 Ah; 0.5P charge and discharge · 400 V AC, 50/60 Hz; MQTT, IEC 104 and Modbus TCP/IP interfaces · IP55; aerosol and water fire protection; -30 to 55 °C, derating above 45 °CControlled datasheet and requirement-by-requirement compliance matrixConfiguration check
Information to prepare12 months of bills and tariff · Interval load data · Critical loads and outage history · Solar/generator details · Single-line and transformer data · Site, fire and interconnection constraints · Service voltage and frequency (the Philippine grid is 60 Hz) · Existing solar: inverter make, rating and how it connects · The largest motor that must start in an island, with its starting current · Distance to the coast and exposure to salt airDrawings, terminals, communications, accessories and system interfacesEvidence required
Approval and supplyNot shown on this pageCurrent certificates, test records, principal confirmation, availability and deliveryRelease before offer
02Configuration gate
What must be confirmed before an offer.
Capacity, savings and backup duration require validated interval load, site and operating data; monthly consumption alone is insufficient. Frequency, service voltage and the largest motor to be started are confirmed before any model is proposed.
- 0112 months of bills and tariff
- 02Interval load data
- 03Critical loads and outage history
- 04Solar/generator details
- 05Single-line and transformer data
- 06Site, fire and interconnection constraints
03Controlled document request
Request a controlled offer.
Need the current datasheet or compliance evidence? Metro Power will match the document revision, model and configuration to your requirement before release. Tell us the decision, TOR or application the document must support.